PennyCollector.com - The official website for elongated pennies, penny books and penny machines Penny Men CTM Group
Report New Information
Location Details: Machine Details:
  Location Name: 
Address: 
  City: 
    Country: 
Zip Code: 
Website: 
Location Phone: 
Updated: 
Status: 
PennyCollector Machine: 
Please include details about the machine and a written description of each coin.
  Designs    Type 
  Designs    Type 
  Designs    Type 
Comments: 
  Please be specific regarding the machine location. Is it upstairs? Downstairs? By the entrance? etc...

Old Orchard Pier Machine Locations > Maine

PO Box 261
Old Orchard Beach, ME , 04064

Phone: 207-934-2500

Website

Old Orchard is on the ocean, and there is an amusement park there. The park extends onto a pier that goes over the water. The pier has lots of bars, gift shops and the like on it. But it also has a penny machine.

Machine 3 The machine is on your right next to claw machines when entering the pier. It has 4 images all say 'Old Orchard Beach Maine' on them. Each design costs 3 quarters and 1 penny. Designs are:
1) 'Old Orchard Beach Maine', lobster with trap,
2) 'Old Orchard Beach Maine', pier entrance,
3) 'Old Orchard Beach Maine', pier (side view),
4) 'Old Orchard Beach Maine', Ferris wheel,
Rear- The Pier Since 1886, Old Orchard Beach, Maine

Retired Machines:

Retired 1: 1) 'Old Orchard Beach Maine', A Lobster (V), 2) 'Old Orchard Beach Maine', The pier entrance structure (V), 3) 'Old Orchard Beach Maine', A Lighthouse and building (V), 4) 'Old Orchard Beach', A sunset (H).
Retired 2: 1) 'Old Orchard Beach Maine', Sunset, 2) 'Old Orchard Beach Maine', beach scene, 3) 'Whale Watching in Maine', 4) 'Portland Head lighthouse Maine'.

8/7/25 - My kids chose different designs but ended up with the same one (Ferris wheel), might have been our error but just be aware

7/7/2026 - Machine still in same location (building label "the Pier") on the right side as you are walking through the building to get to the pier. The alignment is off. All four designs are working but easiest way to get design would be to not reset crank alignment and press multiple pennies until you get design desired.

7/22/26 - I only rolled "The Pier" design, but, though it rolled a little short (barely elongated enough to fit the image), the alignment was perfect.

Machine 3




Retired 2




Retired 1